General Information

• 200W systems are the only road legal kits for Australia
• 300W systems are road legal for New Zealand and off road use in Australia

Fitting to YOUR bike

• This list is a general guide to the types of bike the system will most likely fit straight out of the box.
  It does not mean it may not still suit you bike, it might mean minor changes or considerations. Please contact us info@elationebikes.com.au for further assistance or advice.

  For further pictures to assist go to eLation Install
   

• Tube Size Diameter from 30mm to 55mm. Smaller and larger tubes can be accept by modifying flexi-clamps yourself or purchase a set made to order (see Accessories).

• Tapered spindle (most common) - Cartridge (below) or ball and cup acceptable. Other bikes need to swap their spindle to this type.  (see Accessories).

• Diamond Frame (most common) - NO rear suspension. High top cross tube. See below for acceptable variations

  

   

• Other frames may be suited but with limitations or modifications needed for installation
   
  • Recumbent bikes and Trikes. Kits have been successfully installed but generally need some modification to the bike mount plate.
     
  • Road bike curved handle bars. Required awkward use of throttle or use of thumb type throttle.
     
  • Not really suited as kit will most likely impede on folding of bike
     
  • Some female bike frames will not allow battery to fit in preferred position. This can be overcome by mounting battery UNDER diagonal tube (going to handle bar) or placing on Back rack.
    
    
     
  • Rear Suspension is acceptable providing seat post tube and diagonal tube (going to handle bar) are fixed. Eg.
    This bike IS NOT suited.

[ Home ] [ 200W KITS ] [ 300W KITS ] [ 500W KITS ]

Copyright © 2008 eLation eBikes
Last modified: 08/27/08