NOTE: 500W systems are not currently being stocked. This information is for advance notice.

• Common Equipment for all 500W kits
  • eLation designed crank system
    • 28/38/48 T Gear ring set based on BCD 64/104 four hole standard.
    • 48 T steel gear ring for motor drive based on BCD 104 four hole standard.
    • eLation Alloy Cranks
    • eLation Spider and clutch drive
  • eLation designed motor mount system
    • Bike mount plate
    • Bike Flexi Chain
    • Motor mount plate
    • eLation Battery mounting kit
    • 110-240VAC 24V 3A battery charger
    • 24VDC 300W Brushless motor with planetary gears
  • Built in motor controller with protection circuit to prevent
    • over current
    • over temperature
    • under voltage
  • Half Grip Twist throttle control
  • 3 LED battery status indicator, built into throttle grip housing
  • On/Off switch, built into throttle grip housing
  • Flexible mounting and installation options for motor location (limited and bike dependant)
  • ALL mounting hardware and detailed instructions
  • Weight added to bike (excluding battery) 4.5kg
     
• 500W LiFePO4 Kit
  • 24VDC 10Ah 3C (5C max) LiFePO4 Battery Pack, including key lock security
  • 110-240VAC 24V 3A battery charger (approx 3-4 hours for full charge)
  • Battery Weight 3kg (including case)
  • Battery Dimensions 350mm*85mm*85mm
  • Battery Base Plate Dimension 80mm*80mm*35mm
     

RRP Pricing

NOTE: 500W systems are not currently being stocked. This information is advance notice for 1st Quarter 2009 release.

Note: Specifications subject to change without prior notice. Any change to specification will not negatively impact on system performance or function.

[ Home ] [ Up ]

Copyright © 2008 eLation eBikes
Last modified: 08/28/08